210cc 4 stroke Petrol High Pressure Washer
AFTER SALES SUPPORT
(toll free) MODEL No.: SHW196 • 06/2019 9885
e-mail: info.aldi@positecgroup.com
AUS
49
1300 889 028
AUS
Pump is noisy Air is in the pump. Check that hoses and
fittings are air tight.
Turn off machine
and purge pump by
squeezing trigger gun
until a steady flow of
water emerges through
the nozzle.
Low oil in Pump. Check oil and add oil if
low.
Water leaks from
pump (up to 10
drop per minute is
Permissible)
Loose fittings. Check fittings.
Water seals are
damaged or worn.
Contact Customer
Service
Thermal protection
device is activated.
Thermal protection
device will auto reset.
Do not run pump for
more than 5 minutes
without spraying.
Oil drip Oil seals are
damaged or worn.
Contact Customer
Service
For further inquiries or issues associated with your tool, call our
Customer Service on 1300 889 028 or email us at
info.aldi@positecgroup.com
To Next Page
Loading...
Need help?
General
