Connections – Chapter 2
Wedge Reference Manual 27
Ë Connect another MIDI cable from the Wedge’s MIDI [OUT/THRU] connector to
the MIDI IN connector of the other MIDI device.
Note: It is not necessary to follow step 2 if you intend to only send information to the
Wedge, and do not need to receive information back from it. Example: If you only
want to be able to recall Programs using MIDI program change messages, there is
no need to connect a cable to the Wedge’s [OUT/THRU] connector.
For more information about MIDI and Modulation, refer to Chapter 6.
To Next Page
Loading...
