MIDI Applications – Chapter 6
Wedge Reference Manual 69
Modulation Parameters Index
The following is a chart describing which parameters of each Configuration are
controlled by Modulators X and Y. Use this chart to determine what control
possibilities exist for each Program.
Configuration Mod X Mod Y
LARGE HALL Decay Wet/Dry Mix
HALL REVERB Decay Wet/Dry Mix
STEREO ROOM Decay Wet/Dry Mix
ROOM REVERB Decay Wet/Dry Mix
CHAMBER Decay Wet/Dry Mix
AMBIENCE Decay Wet/Dry Mix
LARGE PLATE Decay Wet/Dry Mix
PLATE Decay Wet/Dry Mix
ROOM+HALL Decay (Room) Decay (Hall)
ROOM+PLATE Decay (Room) Decay (Plate)
PLATE+HALL Decay (Plate) Decay (Hall)
NONLINEAR Decay Wet/Dry Mix
MONO DELAY Feedback Wet/Dry Mix
PINGPONGDELAY Feedback Wet/Dry Mix
MULTI TAP Master Feedback Wet/Dry Mix
DELAY:DELAY Delay 1 Feedback Delay 2 Feedback
CHRS/FLANGE Wet/Dry Mix Depth*
QUAD CHORUS Wet/Dry Mix Depth*
CHRS:CHRS Chorus 1 Wet/Dry Mix Chorus 2 Wet/Dry Mix
QUAD PITCH (none) (none)
LEZLIE}ROOM Speed (Slow/Fast) Motor (On/Off)
DELAY}ROOM Delay Feedback Reverb Decay
CHORUS}ROOM Chorus Wet/Dry Mix Reverb Decay
ROOM}FLANGE Reverb Decay Flange Wet/Dry Mix
FLNG}DLY}ROOM Flange Wet/Dry Mix Reverb Decay
ROOM+DELAY Reverb Decay Delay Feedback
ROOM+CHORUS Reverb Decay Chorus Depth
ROOM+FLANGE Reverb Decay Flange Depth
* Note: If audio is going through a chorus effect and the depth parameter is changed,
you will notice audible “clicks”. This is due to the fact that the processor is making
significant changes in the effect’s algorithm. We recommend that you change the
setting of this parameter only while no audio is running through the effect.
To Next Page
Loading...
