Contents
1 Preface............................................................................................................................ 7
1.1 Conditions and Requirements................................................................................... 7
1.2 Environmental compliance........................................................................................ 8
2 Safety............................................................................................................................... 9
2.1 Safety considerations................................................................................................ 9
2.2 Definitions of expressions..........................................................................................9
3 Description.................................................................................................................. 11
3.1 Components............................................................................................................ 11
3.2 Name plate.............................................................................................................. 14
3.3 Function...................................................................................................................16
3.4 Multi-pass................................................................................................................ 17
3.5 Identification of plate side........................................................................................17
4 Installation................................................................................................................... 19
4.1 Before installation....................................................................................................19
4.2 Requirements.......................................................................................................... 20
4.3 Lifting.......................................................................................................................22
4.4 Raising.....................................................................................................................24
5 Operation..................................................................................................................... 27
5.1 Start-up....................................................................................................................27
5.2 Unit in operation...................................................................................................... 29
5.3 Shut-down............................................................................................................... 29
6 Maintenance.............................................................................................................. 31
6.1 Cleaning – Non-product side...................................................................................31
6.2 Opening...................................................................................................................33
6.2.1 Bolt configuration....................................................................................... 33
6.2.2 Opening procedure.................................................................................... 34
6.3 Manual cleaning of opened units.............................................................................36
6.3.1 Deposits removable with water and brush.................................................37
6.3.2 Deposits not removable with water and brush...........................................37
6.4 Closing.....................................................................................................................38
6.5 Closing - TL15......................................................................................................... 40
6.6 Pressure test after maintenance..............................................................................41
6.7 Regasketing.............................................................................................................42
6.7.1 Clip-on / ClipGrip........................................................................................42
6.7.2 Clip-ad gaskets (AQ10 and AQ6L)............................................................ 43
To Next Page
Loading...
Need help?
General
