To Next Page

To Previous Page

7. Maintenance7.2 Assembly of ThinkTop

Step 1

Place sensor unit in base and tighten screw (torque: 1 Nm).

Step 2

Assemble base with adapter by turning adapter slightly

anticlockwise and tighten the three screws (1.9 Nm).

Note:

Turn banjo

connection!

Step 3

1. Replace solenoid valves (up to three) with new ones.

2. Tighten screws (0.2 Nm).

Step 4

Replace cover of ThinkTop

and tighten the three screws

(0.6 Nm).

Study the instructions carefully.

Handle scrap correctly.

Always keep spare X-rings in stock.

Alfa Laval ThinkTop Digital 8 User Manual

Questions and Answers: