14
English
MULTIJET PRO
ICONS DESCRIPTION:
Active actuator test function;
Active pressure setting;
Connection safety warning (Check locking of connections with the hose);
Drain status;
Identification of injectors in the first digit of the display;
Indicates operation relative to the Injector Test;
Initial RPM range setting;
Final RPM range setting;
The display has four digits that provide necessary information on the entire test and cleaning procedure of injectors.
Injector 1
Resistance
of the Injector 1
IT IS IMPORTANT TO REMEMBER THAT IN THE TEST PROCEDURE,
WHEN THE “INJ” ICON IS ON, THE FIRST DIGIT OF THE DISPLAY
WILL REFER TO THE INJECTOR TESTED IN THE CORRESPONDING
TEST TUBE, AND THE OTHER DIGITS WILL INFORM THE
RESISTANCE OF EACH INJECTOR.
2.4 - ICONS
To Next Page
Loading...