alfatest Multijet Pro - Technical Specifications

To Next Page

To Previous Page

English

MULTIJET PRO

TECHNICAL SPECIFICATIONS

POWER SUPPLY

- Selector switched to 110VAC

. Voltage range: ................................................................................. 100V - 130V

. Maximum power consumption: .................................................................. 300W

. General fuse ....................................................................................... 5 A (5X20)

- Selector switched to 220VAC

. Voltage range: ................................................................................. 200V - 240V

. Maximum power consumption: .................................................................. 300W

. General fuse ....................................................................................... 4 A (5X20)

FREQUENCY: .......................................................................................... 47Hz - 63Hz

PRESSURE RANGE

. Maximum: ................................................................................4,5 bar to 5,5 bar

. Minimum: .................................................................................0,2 bar to 0,3 bar

ULTRASOUND

. Frequency: ........................................................................................... ~40KHz

. Potency: ................................................................................................... ~50W

Note: The ultrasound behavior depends of the electric voltage on the outlet.

RESISTANCE READING (ONLY ON TEST INJECTORS OUTPUT)

. Resistance < 0,5



- short circuit

. Resistance >= 36,5



- open circuit

AUXILIARY OUTLET - Available on limited series only.

. Voltage:................................................................Same voltage of power supply

. Maximum current allowed: ............................................................................ 2A

NOTE: Using this outlet is recommended for supply of exclusive accessories for this equipment.