alfatest Multijet Pro - English

3
E
n
g
l
is
h
MULTIJET PRO
TABLE OF CONTENTS
INTRODUCTION..........................................................................................................5
SAFETY INSTRUCTIONS...........................................................................................6
1.1 – BASIC ACCESSORIES........................................................................................7
1.2 – OPTIONAL ACCESSORIES.................................................................................8
2.0 - KNOWING THE EQUIPMENT............................................................................11
2.1 – FRONT VIEW......................................................................................................11
2.2 – REAR VIEW........................................................................................................12
2.3 – CONTROL PANEL..............................................................................................13
2.4 – ICONS................................................................................................................14
3.0 - INSTALLING YOUR MULTIJET PRO................................................................15
3.1 - TEST FLUID.....................................................................................16
3.2 – ULTRA CLEANER BIO.......................................................................................17
3.3 - PRESSURE HOSE CONNECTION....................................................................17
3.4 - CABLES CONNECTION....................................................................................18
3.5 - ASSEMBLY OF INJECTORS FOR T EST..........................................................19
4.0 -TEST..................................................................................................................20
4.1 – PANEL INTERPRETATION................................................................................22
4.2 – PAUSING/STOPPING A TEST..........................................................................22
4.3 – INJECTOR TEST...............................................................................................23
1 - TIGHTNESS TEST..........................................................................................23
2 – CONTINUOUS CYCLE TEST (PULSE + JET)...............................................23
3 – SINGLE CYCLE TEST (PULSE + JET)..........................................................23
4 -
ACCELERATED TEST OF 1,000 TO 7,000 RPM (ACCELERATED PULSE)
..........23
5 -
ACCELERATED TEST OF 1,000 TO 15,000 RPM (ACCELERATED PULSE)
........23
6 – ACCELERATED TEST OF 1,000 TO 7,000 RPM (GAS)................................23
7 – MANUAL ACCELERATION TEST..................................................................25
8 – MEMO TEST..................................................................................................26
9 – PROGRAMMABLE TEST (PROG)................................................................ 27
INJECTED VOLUME CONTROL FOR HIGH-FLOW INJECTORS .........28
10 – MANUAL RESISTANCE READING............................................................29