18 | About your monitor
Electrical specifications
Video input signals HDMI 2.0/DisplayPort 1.4, 600 mV for each
differ
ential line, 100 Ω input impedance per differential
pair
AC input voltage/
frequency/cu
rrent
100 VAC to 240 VAC/50 Hz or 60 Hz + 3 Hz/3 A
(typical)
Inrush current • 120 V: 40 A (maximum) at 0°C (cold start)
• 240 V: 80 A (maximum) at 0°C (cold start)
Power consumption • 0.3 W (Off mode)
1
• 0.5 W (Standby mode)
1
•34.0 W (On mode)
1
• 200 W (Max.)
2
•39.2 W (P
on
)
3
•123.0 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Maximum brightness and contrast setting with maximum power loading on all
USB ports.
3
P
on
: Power consumption of On Mode measured with reference to Energy Star
test method.
TEC: Total Energy Consumption in kWh measured with reference to Energy
Star test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such
information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy
or completeness is expressed or implied.
Description Value
To Next Page
Loading...
