64 | Operating the monitor
OSD warning message
When the monitor does not support a particular resolution mode, you will see the
fol
lowing message:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the horizontal and vertical
frequency ranges addressable by this monitor.
The recommended mode is 3440
x 1440.
When you adjust the Brightness level
above the default level for the first time,
the following message appears:
NOTE: If you select Yes, the message will not appear the next time you
changes the Brightness setting.
When you change the default setting of power
saving features for the first time,
such as Smart HDR or USB, the following message appears:
NOTE: If you select Yes for either of the features mentioned above, the
message will not appear the next time you change the settings of these
features. When you perform a factory reset, the message will appear
again.
To Next Page
Loading...
