36 | Setting up the monitor
Removing the monitor stand
NOTE: To prevent scratches on the screen when removing the stand,
ensure that the monitor is placed on a soft surface and handle it carefully.
NOTE: The following steps are specifically for removing the stand that is
shipped with your monitor. If you are removing a stand that you
purchased from any other source, follow the setup instructions that are
included with the stand.
To remove the stand:
1. Tur
n off the monitor.
2. Disconnect
all the cables from the computer.
3. Plac
e the monitor on a soft cloth or cushion.
4. Carefully slide and remove the I/O cover from the monitor.
5. Disconnect the cables from the monitor and slide them out through the
cable-management slot on the stand riser.
6. Press and hold the stand release button at the back of the display.
To Next Page
Loading...
