Table 10. System setup options—Security menu (continued)
Security
Clear Enables or disables the computer to clear the PTT owner information, and returns
the PTT to the default state.
Default: OFF
SMM Security Mitigation
SMM Security Mitigation Enables or disables additional UEFI SMM Security Mitigation protections.
Default: ON
NOTE: This feature may cause compatibility issues or loss of functionality with
some legacy tools and applications.
Data Wipe on Next Boot
Start Data Wipe When enabled, the BIOS will schedule a data wipe cycle for all storage devices
that are connected to the system board on the next reboot.
Default: OFF
Absolute
Absolute Enables, disables or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
Default: Enable Absolute
UEFI Boot Path Security
UEFI Boot Path Security Determines if the system will prompt the user to enter the admin password (if set)
when booting to a UEFI boot path device frim the F12 boot menu.
Default: Always Except Internal HDD.
Firmware Device Tamper Detection
Firmware Device Tamper Detection Enables the Firmware Device Tamper Detection feature.
Default: Silent
Clear Firmware Device Tamper Detection Enables to clear the event and allow booting.
Default: OFF
Table 11. System setup options—Passwords menu
Passwords
Admin Password Enables you to set, change, or delete the administrator (admin) password. The
admin password enables several security features
System Password Enables you to set, change, or delete the system password.
M.2 PCIe SSD-1 Enables you to set, change, or delete the M.2 PCIe SSD-1 password.
Password Configuration
Upper Case Letter Enforces password restriction that the password must contain at least one upper
case letter.
Default: OFF
Lower Case Letter Enforces password restriction that the password must contain at least one lower
case letter.
Default: OFF
Digit Enforces password restriction that the password must contain at least one digit.
Default: OFF
66