Allegion Interflex IF-4070 - Mounting the Controller; Cabinet and Wall Mounting Procedures

3 Mounting the controller
© 2021 Interflex Datensysteme GmbH IF-4070 Controller 10
3 Mounting the controller
NOTICE
Damage to property due to manipulation of the controller
Manipulation of the controller can lead to data loss.
u Install the controller in the secured area, taking the technical requirements into account
With the two enclosed housing brackets, you can mount the controller into a 19” cabinet.
1 Housing bracket 2 Angle bracket
The illustration shows the installation with housing brackets 1 in a 19” cabinet. The angle brackets 2
allow the controller to be pulled out and hooked into the rack, e.g. to connect cables.
You can also mount the controller onto a wall using the device brackets. Without brackets, the
device can also be placed on a tabletop or even stacked.