Lock Indicator Guide
Schlage • Schlage Control Smart Locks User Guide • 5
Lock Indicator Guide
Feature Actions Lights Beeps
Factory Default Reset (FDR) Successful initiation 2 Green 2
Failed to start after successful initiation 2 Red, Long 2 Long
Complete 2 Green, Long 1 Long
Failed 2 Red, Long 2 Long
Low Battery Delay before unlock 9 Battery
—
Credential Normal access granted 1 Green, Long 1
Freeze Success 3 Red/Green Alternating 1
Un-freeze Success 3 Green 1
Access denied, invalid credential 2 Red 1
Access denied, outside timezone 4 Red 1
Access denied, lock in freeze state 12 Red 1
BLE and Coupling HHD connected through BLE 1 Red
—
Lock Identication Identifying a lock from the pool of locks 5 Red
—
Power ON Power ON 1 Green, Long
—
1 Green, Long 1 Long
2 Green 2
Jump Start Jump Start 1 Green, Long 1 Long
2 Green 2
Firmware Upgrade Image Transfer 1 Red
—
Image verication Red/Green Alternating
—
Image download 1 Green
—
Power ON (See Power on sequence) (See Power on Sequence)
To Next Page
Loading...
Need help?
General
