Battery Jump
Schlage • Schlage Control Smart Locks User Guide • 7
Battery Jump
The emergency battery jump start can be used to unlock the door if the batteries are dead.
L WARNING: The lock will remain unlocked until you change the battery and relock the door!
1. Touch a new high-quality alkaline 9-volt battery to the
contacts below the bolt throw.
L There is no specic way the battery has to touch
the connection points.
2. Wait for 3 beeps.
3. Present a valid credential.
4. Rotate the bolt throw away from the door edge.
5. Replace the batteries. See Changing the Batteries on
page 6.
6. Present a valid credential and relock the lock to ensure
proper lock operation.
L The lock will remain unlocked until you change the
battery and relock the door!
To Next Page
Loading...
Need help?
General
