Name: ALLEN & HEATH CQ-18T
Brand: ALLEN & HEATH
Rating: 5 (1 reviews)

To Next Page

To Previous Page

 35

User Guide V1.1.0 Issue 1

Gain Assistant will automatically raise the Gain and

set the optimum input level.

Once the Auto Set function is complete, the Auto

Gain feature will be enabled. The input is now ready

for processing and recording or adding to a mix.

 Gain Assistant can also be found in the PROCESSING / Preamp section of a

Complete Channel.

Auto Gain

This can be used independently of Auto Set and turned on or off at any time. Auto

Gain constantly checks the input signal level in the background and if the preamp

gain is set too high (e.g. an instrument or voice get louder than they were during

sound check), it will reduce gain until the signal is back to an optimum level.

Multi Select

Use Gain Assistant functions on multiple preamps at the same time with Multi

Select by simply turning it on and then selecting the desired channels; Input

Source and Gain Assistant settings will then be available at the bottom of the

screen.

Questions and Answers:

Need help?

Do you have a question about the ALLEN & HEATH CQ-18T and is the answer not in the manual?

ALLEN & HEATH CQ-18T Specifications

General