4 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect
Publication 1732E-IN010C-EN-E - June 2013
Additional Resources
If you would like a manual, you can:
• download a free electronic version from the internet:
http://www.rockwellautomation.com/literature/
• purchase a printed manual by contacting your local Allen-Bradley distributor or
Rockwell Automation representative
Overview
The 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR, 1732E-16CFGM12QCR,
1732E-16CFGM12P5QCR, 1732E-16CFGM12QCWR,
1732E-16CFGM12P5QCWR ArmorBlock™ are I/O modules that communicate via
EtherNet/IP. The sealed IP65, IP66, IP67 and IP69K housing of these modules requires
no enclosure. The I/O modules have dual Ethernet ports and use an embedded Ethernet
switch.
The modules have Auxiliary power In and Out connectors. There is no need to house
these modules in a secondary enclosure. The I/O modules support the QuickConnect
feature, onboard nonvolatile memory for storing block-specific data such as Tool ID and
counter value, and provide basic distributed I/O functionality.
Resource Description
ArmorBlock 2-Port EtherNet with Diagnostics
and QuickConnect Wiring Diagrams,
publication 1732E-WD004
Detailed description of how to wire your
1732E-12X4M12QCDR or 1732E-12X4M12P5QCDR
module.
ArmorBlock WeldBlock 2-Port Ethernet
Self-configurable with QuickConnect Wiring
Diagrams, publication 1732E-WD005
Detailed description of how to wire your
1732E-16CFGM12QCWR or
1732E-16CFGM12P5QCWR module.
ArmorBlock 2-Port Ethernet Self-configurable
with QuickConnect Wiring Diagrams,
publication 1732E-WD006
Detailed description of how to wire your
1732E-16CFGM12QCR or
1732E-16CFGM12P5QCR module.
Ethernet QuickConnect Application
Technique, publication ENET-AT001
Detailed explanation on how to set up and use
QuickConnect ArmorBlock modules.
Industrial Automation Wiring and Grounding
Guidelines, publication 1770-4.1
More information on proper wiring and grounding
techniques.
To Next Page
Loading...
Need help?
General
