58 Rockwell Automation Publication 22C-UM001J-EN-E - January 2017
Chapter 3 Programming and Parameters
Basic Display Group
b001 [Output Freq] Related Parameter(s): b002, b008, P034, P035, P038
Output frequency present at T1, T2 & T3 (U, V & W).
Values Default: Read Only
Min/Max: 0.00/P035
[Maximum Freq]
Display: 0.01 Hz
b002 [Commanded Freq] Related Parameter(s): b001, P034, P035, P038, d302
Value of the active frequency command. Displays the commanded frequency even if the drive is not running.
Values Default: Read Only
Min/Max: 0.00/P035 [Maximum Freq]
Display: 0.01 Hz
IMPORTANT
The frequency command can come from a number of sources. See Start and Speed Reference Control on page 37 for more information.
b003 [Output Current]
The output current present at T1, T2 & T3 (U, V & W).
Values Default: Read Only
Min/Max: 0.0/(Drive Rated Amps × 2)
Display: 0.1 Amps
b004 [Output Voltage] Related Parameter(s): P031, A170, A174
Output voltage present at terminals T1, T2 & T3 (U, V & W).
Values Default: Read Only
Min/Max: 0/510
Display: 1 VAC
b005 [DC BusVoltage]
Present DC bus voltage level.
Values Default: Read Only
Min/Max: 0/820
Display: 1 VDC
b006 [Drive Status] Related Parameter(s): A166
Present operating condition of the drive.
Values Default: Read Only
Min/Max: 0/1
Display: 1
1 = Condition True, 0 = Condition False
Running Bit 1
Forward Bit 2
Accelerating Bit 3
Decelerating Bit 4
To Next Page
Loading...