198 Rockwell Automation Publication 1756-UM001M-EN-P - February 2012
Chapter 13 SIL 2 Certification
For more information about the ControlLogix SIL2- certified fault-tolerant
system, see the application technique manual that corresponds with your
application.
Additional Resources
These documents contain additional information concerning related Rockwell
Automation products.
You can view or download publications at http://www.rockwellautomation.com/
literature. To order paper copies of technical documentation, contact your local
Rockwell Automation distributor or sales representative.
Table 53 - ControlLogix SIL2 System Configuration Manuals
If using Then reference this manual
SIL2 Fault-tolerant I/O subroutines
(available for use with RSLogix 5000 software, version 15 and later)
ControlLogix SIL2 System Configuration Using RSLogix 5000 Subroutines, publication
1756-AT010
SIL2 Fault-tolerant I/O Add-On Instructions (available for use with
RSLogix 5000 software, version 16 and later)
ControlLogix SIL2 System Configuration Using RSLogix 5000 Subroutines, publication
1756-AT012
Resource Description
Using ControlLogix in SIL 2 Applications Reference Manual, publication 1756-RM001
Provides list of ControlLogix system components that meet SIL 2 requirements as well as
programming requirements.
ControlLogix SIL2 System Configuration Using RSLogix 5000 Subroutines, publication
1756-AT010
Explains how to use subroutines provided by Rockwell Automation to configure a fault-
tolerant system.
ControlLogix SIL2 System Configuration Using RSLogix 5000 Subroutines, publication
1756-AT012
Explains how to use Add-On Instructions provided by Rockwell Automation to configure a
fault-tolerant system.
To Next Page
Loading...
Need help?
General
