56 Rockwell Automation Publication 1756-UM001M-EN-P - February 2012
Chapter 3 Start Using the Controller
When the upgrade is complete, the Update Status dialog box indicates that
the upgrade is complete.
9. Click OK.
10. Close ControlFLASH software.
Use AutoFlash to Upgrade Firmware
To upgrade your controller firmware with the AutoFlash feature of RSLogix 5000
software, complete these steps.
1. Verify that the appropriate network connection is made and your network
driver is configured in RSLinx software.
2. Use RSLogix 5000 software to create a controller project at the version you
need.
3. Click RSWho to specify the controller path.
To Next Page
Loading...
Need help?
General
