Index
Numerics
1203-GK5 module
configuring to communicate with a PLC scanner, 4-
8 to 4-12
configuring to communicate with an SLC scanner,
4-13 to 4-18
configuring with dip switches, 2-2
creating an EDS file for, 4-4 to 4-7
default settings, 2-1, B-1
features, 1-2
function, 1-1
hardware, 1-4
illustration, 1-4
installation, 3-3 to 3-5
LEDs, 7-1 to 7-4
removal, 3-6
setting up, 1-5
specifications, A-1
switches, 2-1
troubleshooting, 7-1
1336-GM5 board
configuring to communicate with a PLC scanner, 4-
8 to 4-12
configuring to communicate with an SLC scanner,
4-13 to 4-18
configuring with dip switches, 2-2
creating and EDS file for, 4-4 to 4-7
default settings, 2-1, B-1
features, 1-2
function, 1-1
hardware, 1-5
illustration, 1-5
installation, 3-7 to 3-9
LEDs, 7-1 to 7-4
removal, 3-10
setting up, 1-5
specifications, A-2
switches, 2-1
troubleshooting, 7-1
A
adapter, refer to 1203-GK5 module or 1336-GM5 board
B
block transfer emulation, refer to emulated block transfer
commands
C
cables
DeviceNet
connecting, 3-9
connecting to connector, 3-4
connecting to module, 3-5
disconnecting, 3-6, 3-10
selecting, 3-2
SCANport
connecting to module, 3-5
disconnecting, 3-6
selecting, 3-1
communications module, refer to 1203-GK5 module or
1336-GM5 board
configuring the 1203-GK5 module or 1336-GM5 board,
2-2
D
data rate, 2-5
datalinks
default I/O size, 4-6
I/O size, 4-11, 4-16
setting, 2-6
default settings for adapter, 2-1
DeviceNet
cable, 3-2
definition, P-3
overview, 1-1
DeviceNet adapter, refer to 1203-GK5 module or 1336-
GM5 board
DeviceNet Manager
about, 4-1
creating an EDS file, 4-4 to 4-7
online mode, 4-2 to 4-3
DeviceNet objects, C-1 to C-26
connection, C-6
DeviceNet, C-5
identify, C-2
message router, C-4
parameter, C-10
PCCC, C-18
register, C-8
SCANport pass-through fault queue, C-21
SCANport pass-through link, C-25
SCANport pass-through parameter, C-20
SCANport pass-through warning queue, C-23
DIN rail
attaching modules, 3-3
specification, A-1
dip switches, 2-1
E
editing parameters, 4-20 to 4-21
EDS file, 4-4
electronic data sheets, 4-4
electrostatic discharge precautions, 3-7
emulated block transfer commands
fault command write, F-15
fault queue entry read full, F-16
fault queue size, F-18
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
