8 Rockwell Automation Publication 2080-UM002K-EN-E - March 2019
Chapter 1 Hardware Overview
Programming Cables
Micro800 controllers have a USB interface, making standard USB cables usable
as programming cables.
Use a standard USB A Male to B Male cable for programming the controller.
Embedded Serial Port Cables
Embedded serial port cables for communication are listed here. All embedded
serial port cables must be 3 meters in length, or shorter.
Embedded Ethernet Support
For Micro850 and Micro870 controllers, a 10/100 Base-T Port (with embedded
green and yellow LED indicators) is available for connection to an Ethernet
network through any standard RJ-45 Ethernet cable. The LED indicators serve as
indicators for transmit and receive status.
Embedded Serial Port Cable Selection Chart
Connectors Length Cat. No. Connectors Length Cat. No.
8-pin Mini DIN to 8-pin Mini DIN 0.5 m (1.5 ft) 1761-CBL-AM00
(1)
8-pin Mini DIN to 9-pin D Shell 0.5 m (1.5 ft) 1761-CBL-AP00
(1)
8-pin Mini DIN to 8-pin Mini DIN 2 m (6.5 ft) 1761-CBL-HM02
(1)
8-pin Mini DIN to 9-pin D Shell 2 m (6.5 ft) 1761-CBL-PM02
(1)
8-pin Mini DIN to 8-pin Mini DIN
(with lock mechanism on both
connectors)
2 m (6.5 ft) 1761-CBL-AH02 8-pin Mini DIN with lock
mechanism to 9-pin D Shell
2 m (6.5 ft) 1761-CBL-PH02
— 8-pin Mini DIN to 6-pin RS-485
terminal block
30 cm (11.8in.) 1763-NC01 series A
(1) Series C or later for Class 1 Div 2 applications.
To Next Page
Loading...
