114 Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Chapter 8 Troubleshoot the System
Follow these steps to restore the terminal.
1. While the terminal is not powered, use a small pointed object to press and
hold the Restore button located underneath the battery cover.
2. Power up the terminal.
3. Wait until the fault indicator lights up solid red, or the text “GO” is
displayed on the screen before releasing the Restore button.
4. Wait for a few minutes until the process is completed.
5. When the restore process is completed, the terminal will boot into the
main configuration screen.
Display Brightness N Y
Display Timeout N Y
Terminal Name N Y
Settings Cleared or Reset to Default When Using Restore or Out-of-Box Condition
Setting Restore Out-of-Box Condition
BOOT GO
©2016 Rockwell Automation, Inc.
All Rights Reserved.
To Next Page
Loading...
Need help?
General
