Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017 9
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• Who should use this manual
• The purpose of this manual
• Additional resources
• Firmware upgrades
Who Should Use this
Manual
Use this manual if you are responsible for configuring, operating, or
troubleshooting the PanelView 800 terminals.
No special knowledge is required to understand this manual or operate the
terminal.
Equipment installers must be familiar with standard panel installation
techniques.
Purpose of this Manual
This manual provides information for configuring the PanelView 800 terminal.
You can configure the terminal, through a web browser
(1)
on a computer
connected to the terminal, or through Connected Components Workbench
software. This manual also provides information on how to troubleshoot the
PanelView 800 terminal.
This manual does not give procedures for creating applications that run on the
terminal.
Additional Resources
For additional information on the PanelView 800 terminals, refer to these
publications.
You can view or download publications at
http://literature.rockwellautomation.com
. To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales
representative.
(1)
The web browser feature is not supported on PanelView 800 terminals from firmware revision 3.011 onwards.
Resource Description
PanelView 800 HMI Terminals Installation
Instructions, publication 2711R-IN001
Provides instructions for installing a
PanelView 800 terminal.
To Next Page
Loading...
Need help?
General
