Allen-Bradley PanelView 800 2711R-T4T User Manual

144 Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Appendix E Protected Mode
To exit Protected mode, the running application has to be stopped and unloaded
successfully. To unload an application, go to the File Manager configuration
screen on the terminal and press the Stop Application button.
IMPORTANT
The Stop Application button is only available in firmware
revision 3.011 onwards.
File Manager
Copy Alarm HistoryRecipe
Controller Settings
Main
Delete
Copy
Run
Stop Application
Set As Startup
Source: To:
Internal
Internal
Startup Application
Reset
PVcApplication1

Allen-Bradley PanelView 800 2711R-T4T Specifications

General

Brand	Allen-Bradley
Model	PanelView 800 2711R-T4T
Category	Touch terminals
Language	English