Allen-Bradley PanelView 800 2711R-T4T

Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017 91
Virtual Network Computing Chapter 6
2. Press Communication.
3. Press VNC Settings.
VNC Settings
Setting Description Default
Server Enables or disables VNC connection to the
terminal.
Disabled
Communication
Disable DHCP
Set Static IP Address
VNC Settings
Port Settings
Main
PV800T7T
0
Protocol: *
Status: Unavailable
Device Name:
Node Address:
IP Mode: DHCP
IP Address: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
MAC Address: XX:XX:XX:XX:XX
VNC Settings
Back
Server:
Access:
Server:
Status:
Access:
Disabled
View-Only
View-Only: Control:
Reset Password
Enable / Disable
View-Only / Control
Reset Password