Allen-Bradley PanelView 800

Installation Instructions
PanelView 800 HMI Terminals
Catalog Numbers 2711R-T4T, 2711R-T7T, 2711R-T10T
About This Publication
This document provides instructions on how to install, wire, ground, and troubleshoot PanelView™ 800
terminals. It does not provide information on how to configure or run applications on the following devices:
2711R-T4T, 2711R-T7T, 2711R-T10T
Topic Page
Environment and Enclosure 3
Catalog Number Explanation 6
About the Terminals 6
Install the Terminal 9
USB Ports 14
Choose a Power Supply 15
Remove the Power Terminal Block 16
Connect Power 17
Ground the Terminal 18
Connect Devices 19
Troubleshooting 20
Battery Replacement 21
Specifications 23
Additional Resources 25
Industrial automation
Elincom
Group
European
Union: www.elinco.eu
Russia: www.elinc.ru

Allen-Bradley PanelView 800 Specifications

General

Brand	Allen-Bradley
Model	PanelView 800
Category	Touch terminals
Language	English

Summary

About This Publication

Important User Information

Environment and Enclosure

North American Hazardous Location Approval

Prevent Electrostatic Discharge

Catalog Number Explanation

About the Terminals

Parts List

Install the Terminal

Minimum Spacing

Specifies clearance requirements around the terminal for ventilation and cabling.

Mounting Angle

Details acceptable mounting orientations and temperature restrictions for terminals.

Panel Guidelines

Outlines requirements for supporting panels to ensure proper sealing and support.

Panel Cutout Dimensions

Remove the PanelView 800 Terminal from the Panel

Product Dimensions

USB Ports

Choose a Power Supply

Remove the Power Terminal Block

Connect Power

Ground the Terminal

Connect Devices

Troubleshooting

Battery Replacement

Battery Removal

Describes the process of removing the lithium battery from the terminal.

Specifications

Environmental Specifications

Certifications

Additional Resources