Allen-Bradley POINT I/O series User Manual

Installation Instructions
POINT I/O 2 and 4 Relay Output Modules
Catalog numbers 1734-OW2, 1734-OW4, Series C
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
North American Hazardous Location Approval 4
European Hazardous Location Approval 5
About the Module 6
Mount the I/O Base 8
Install the Module 9
Install the Removable Terminal Block 12
Remove a Mounting Base 14
Communicate with Your Module 14
Wire the Module 15
Interpret Status Indicators 19
Specifications 21

Allen-Bradley POINT I/O series Specifications

General

Series	POINT I/O
Category	Control Unit
Mounting Type	DIN Rail
Manufacturer	Allen-Bradley
Communication Interface	EtherNet/IP, DeviceNet, ControlNet, PROFIBUS DP
Storage Temperature Range	-40°C to 85°C (-40°F to 185°F)
Relative Humidity	5% to 95% (non-condensing)
Shock Resistance	30g (11ms duration)
Vibration Resistance	5G
Certifications	CE, UL, ATEX, IECEx
IP Rating	IP20