Allen-Bradley PowerFlex 755 Quick Start

Rockwell Automation Publication 750-QS001A-EN-P - March 2015 21
Reference Section
Reference Section
These topics are included to provide more detail about the tasks required to start up and configure your drive.
Topic Page
Determine Drive Type 22
Power Wiring 23
Power Jumpers 27
Identify Option Modules and Compatible Ports 32
Drive Device Ports 33
HIM Overview 34
Resetting Factory Defaults 37
Typical Speed Reference Examples 38
EtherNet/IP Communication 52
2-Wire and 3-Wire Control 63
Drive Status Indicators 65
Dynamic Brake Resistor 66
Acceleration and Deceleration Time 68
Direction Mode 70
Analog Output Wiring 74
Digital Output Wiring 75
Relay Output Wiring 76
Disable the HIM Start Function 77
HIM CopyCat Function 78
Motor Overload 82
If You Have to Contact Technical Support 83

Allen-Bradley PowerFlex 755 Specifications

General

Category	AC Drive
Amperage	2.2…1470 A
Output Voltage	0 to Input Voltage
Output Current	2.2…1470 A
Enclosure	IP20, IP30, IP54
Communications	EtherNet/IP, ControlNet, DeviceNet
I/O	Digital, Analog, Encoder, Relay
Safety	Safe Speed Monitor
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload, Short Circuit, Ground Fault, Overtemperature
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5…95% noncondensing
Altitude	Up to 1000m (3300ft) without derating
Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Control Method	Sensorless Vector