54 Rockwell Automation Publication 442L-UM005B-EN-P - April 2017
Chapter 4 Mounting
With two SafeZone Mini devices mounted at an angle of 45° on the front
corners of a vehicle, you can configure the protective fields so that there are no
unprotected areas and the hazardous areas in narrow aisles can also be
protected.
Figure 27 - Mounting Example for Front and Side Protection in a Direction of Travel
With two SafeZone Mini devices mounted diagonally opposite, you can
implement protective fields on the vehicle for all-round protection in all
directions of travel.
Figure 28 - Mounting Example for All-around Protection in All Directions of Travel
Near Range
Make the near range impassible using a bar or a recess, or additionally protect
the near range (50 mm (2.0 in.)) wide area in front of the optics cover using a
proximity switch with 50 mm (2.0 in.) acquisition range. The vehicle can then
be accelerated as required.
Protective field and
warning field safety
laser scanner 1
Protective field and
warning field safety
laser scanner 2
Protective field and
warning field safety
laser scanner 1
Protective field and
warning field safety
laser scanner 2
To Next Page
Loading...
