2. No Basket Rotation
No Basket Rotation (2 Speed Models)
Is the belt(s)
intact and on the
pulley?
Replace belt(s).
No
Is the motor
turning?
Ensure pulleys are properly attached to shafts.
Yes
Yes
Are the
contactors
operating?
No
Is there voltage
present at
contactor coil?
Troubleshoot AP1 Output Board.
Repair/replace contactor as
necessary.
No
Is the proper voltage
present at L1, L2 and L3
on the contactor?
Yes
No
Yes
Troubleshoot why voltage is not getting to
contactor.
No
Is there voltage present on
T1, T2 and T3 on the
contactor when contactor
is pulled in?
Yes
Repair/replace wiring as necessary.
Repair/replace contactor as necessary.
Is there voltage
getting to the motor?
Yes
No
No
Possible bad motor, ohm motor windings.
Replace motor as necessary.
Yes
To Next Page
Loading...
