Programming NetMaster
F232152
130
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Reading Table 41
To determine correct Special Cycle value required,
review table below. Read each row from left to right.
Starting number of row indicates required output value
number to be entered into electronic control.
Special Cycle value is followed by three option
columns. Option columns state whether an action is
ON or OFF (ON indicates option is turned on, OFF
indicates option is turned off).
NOTE: Very High Speed is available on Variable
Frequency Drive models (NCV, NRV, or NXV) only.
Special Cycle Value Special Cycle Option Off/On
Very High Speed
in Final Extract Step
Warm Water in
Final Rinse Step
000 OFF OFF OFF
001 OFF OFF ON
002 OFF ON OFF
003 OFF ON ON
128 ON OFF OFF
129 ON OFF ON
130 ON ON OFF
131 ON ON ON
Table 41
To Next Page
Loading...
