Programming NetMaster
93
F232152
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Reading Table 23
To determine correct output value required, review
table below. Read each row from left to right. Starting
number of row indicates required output value number
to be entered into electronic control.
Output value is followed by three option columns.
Option columns state whether an action is ON or OFF
(ON indicates option is turned on, OFF indicates
option is turned off).
Table Options
All options “OFF” = Water will not be drained from cylinder and water will be used for next period of cycle (for pump
models only).
Auxiliary Drain = Sends signal to an optional auxiliary drain control.
Electric Pump = Water will be pumped from cylinder to increase removal time.
Dump Valve = Water will be drained through an electronically operated valve, if open (OFF). Water will not be drained if
closed (ON).
Output Value Auxiliary Drain Electric Pump Dump Valve
000 OFF OFF OFF
001 OFF OFF ON
002 OFF ON OFF
003 OFF ON ON
004 ON OFF OFF
005 ON OFF ON
006 ON ON OFF
007 ON ON ON
Table 23
To Next Page
Loading...
