© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
43
70417701
20. Special Vend A Data “SPA-”
This option allows the owner to set the day or days of a
special vend.
Special Vend A is used to change the standard vend
prices for special occasions. The special vend can be
programmed to start and end on a specific day or days
of the week.
The owner may also turn the Special Vend A option on
or off if desired.
How to Program Special Vend A Days
Enable “SA01”
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP (∧) or the
DELICATES (∨) keypad until “Prog” appears in
the display. Press the START (enter) keypad and
“AtSH” will appear in the display.
3. Press the LOW TEMP (∧) or the
DELICATES (∨) keypad to scroll through the
programmable options until “SPA-” appears in
the display. Press the START (enter) keypad and
“SA01” will appear in the display.
4. When “SA01” appears in the display, press the
START (enter) keypad. A number will appear in
the display that corresponds to the current
Special Vend A Days Enable Programming
Value .
5. Locate the desired number in the first column of
Table 1 3 on the following pages.
6. Press the LOW TEMP (∧) or the
DELICATES (∨) keypad to increase or decrease
the current number until correct.
7. Press the START (enter) keypad when the correct
number appears in the display. The new value is
saved and the next Special Vend A option,
“SA02”, will appear in the display.
NOTE: To program “SA02” (Special Vend A Start
Hour), continue to the next Special Vend A option.
To program other options, press the MED TEMP
(<) keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the MED TEMP (<) keypad until the control
returns to Ready Mode.
To Next Page
