© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
70417701
48
How to Program Special Vend A Start
Hour “SA02”
This option allows the owner to set the hour that
Special Vend A will begin.
1. Press the LOW TEMP (∧) or the
DELICATES (∨) keypad to scroll through the
programmable Special Vend A options until
“SA02” appears in the display.
2. When “SA02” appears in the display, press the
START (enter) keypad. The current start hour (in
military time) will appear in the display.
NOTE: The hours will be displayed in military
time.
3. Press the LOW TEMP (∧) or the
DELICATES (∨) keypad to increase or decrease
the start hour to the desired hour.
NOTE: The value can be set from 0-23. The default
value is 0.
4. Press the START (enter) keypad when the correct
hour appears in the display. The new value is saved
and the next Special Vend A option, “SA03”, will
appear in the display.
NOTE: To program “SA03” (Special Vend A Start
Minute), continue to next Special Vend A option. To
program other options, press the MED TEMP (<)
keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the MED TEMP (<) keypad until the control
returns to Ready Mode.
How to Program Special Vend A Start
Minute “SA03”
This option allows the owner to set the minute that
Special Vend A will begin.
1. Press the LOW TEMP (∧) or the
DELICATES (∨) keypad to scroll through the
programmable Special Vend A options until
“SA03” appears in the display.
2. When “SA03” appears in the display, press the
START (enter) keypad. The current start minute
will appear in the display.
3. Press the LOW TEMP (∧) or the
DELICATES (∨) keypad to increase or decrease
the start minute to the desired minute.
NOTE: The value can be set from 0-59 minutes.
The default value is 0.
4. Press the START (enter) keypad when the correct
minute appears in the display. The new value is
saved and the next Special Vend A option,
“SA04”, will appear in the display.
NOTE: To program “SA04” (Special Vend A
Length in Hours), continue to next Special Vend A
option. To program other options, press the MED
TEMP (<) keypad and refer to the appropriate
section.
How to Exit Programming Feature
Press the MED TEMP (<) keypad until the control
returns to Ready Mode.
To Next Page
