Allied Telesis AT-GS950/8 Installation Guide

16
Features
Here are the hardware features of the AT-GS950/8, AT-GS950/16, and
AT-GS950/24 Gigabit Ethernet Switches.
Twisted Pair
Ports
 8, 16 or 24 ports
 10Base-TX, 100Base-T and 1000Base-T compliant
 IEEE 802.3u Auto-Negotiation compliant
 Auto-MDI/MDIX
 RJ-45 connectors
 100 meters (328 feet) maximum operating distance
 IEEE 802.3x flow control in 10/100Base-TX full-duplex operation
 IEEE 802.3x back pressure in 10/100Base-TX half-duplex
operation
 IEEE803.3z 1000Base-T flow control
 Support for jumbo frames up to 10KB
LEDs  Speed and link/activity LEDs for the twisted pair ports
 Link/activity LEDs for the SFP slots
 Power LED
SFP Slots  Two slots on the AT-GS950/8 and AT-GS950/16 Switches
 Four slots on the AT-GS950/24 Switch
 Support 100Base-FX and 1000Base-SX/LX transceivers
Note
The SFP slots are paired with twisted pair ports on the switch to
form combo ports. For more information, refer to “Combo Ports” on
page 22.
Note
SFP transceivers must be purchased separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
Installation
Options
 19-inch equipment rack
 Desk or tabletop
 Wall

Allied Telesis AT-GS950/8 Specifications

General

Brand	Allied Telesis
Model	AT-GS950/8
Category	Network Router
Language	English