Chapter 1: Overview
36
Table 7 describes the Link/Activity/Speed and PoE status LEDs.
T
ABLE 7. LINK/ACTIVITY/SPEED AND POE LED DESCRIPTIONS
LED State Description
Link/Activity/
Speed
(LEFT LED)
Off
The port has not established a link with a
network device, or the ecofriendly feature
is enabled.
Flashing
green
Rx or Tx activities at 1000M
Steady
green
The port has established a link with a
network device and is active (1000M)
Flashing
amber
Rx or Tx activities at 10/100M
Steady
amber
The port has established a link with a
network device and is active (10/100M)
PoE
(RIGHT LED)
Off
No link, no power output, or ecofriendly
feature is enabled
Steady
green
PD is on
Flashing
amber
PD maximum current
Steady
amber
PD error
To Next Page
Loading...
