Allied Telesis AT-x230-28GP - Figure 29: Attaching Cable Tray Brackets; Figure 30: Mounting an AT-X230-10 GT Switch in the Brackets

Chapter 2: Installation
58
4. Next attach the cable tray brackets (Figure 29).
F
IGURE 29. ATTACHING CABLE TRAY BRACKETS
5. Mount the AT-x230-10GT switch on the brackets (Figure 30). Screw it
in with the screws from the rubber feet which you removed earlier
(Figure 26 on page 56).
F
IGURE 30. MOUNTING AN AT-X230-10GT SWITCH IN THE BRACKETS