Allied Telesis AT-x230-28GP - Figure 38: Mounting an AT-X230-28 GP Switch in an Equipment Rack

AT-x230-10GT, AT-x230-10GP, AT-x230-18GT, AT-x230-18GP, AT-x230-28GT and AT-x230-28GP Switch Installation Guide
65
3. Mount the AT-x230-28GP switch in a 19-inch equipment rack using
four equipment rack screws (supplied with the equipment rack)
(Figure 38).
F
IGURE 38. MOUNTING AN AT-X230-28GP SWITCH IN AN EQUIPMENT RACK
4. Go to “Cabling the switch” on page 70