AT-x230-10GT, AT-x230-10GP, AT-x230-18GT, AT-x230-18GP, AT-x230-28GT and AT-x230-28GP Switch Installation Guide
59
6. Mount the AT-x230-10GT switch in a 19-inch equipment rack using the
provided spacer bracket mounts with four equipment rack screws
(Figure 31).
F
IGURE 31. MOUNTING AN AT-X230-10GT SWITCH IN THE RACK
7. Secure cables to the cable tray (Figure 32).
F
IGURE 32. SECURING CABLES TO THE CABLE TRAY
8.
9. Go to “Cabling the switch” on page 70
To Next Page
Loading...
