Allied Telesis AT-x230-28GP - Figure 51: Inserting an SFP Transceiver into an SFP Slot; Figure 52: Positioning the SFP Handle in the Upright Position

Chapter 2: Installation
80
3. Position the SFP transceiver with the label facing up.
4. Gently slide the transceiver into the SFP slot until it clicks into place as
shown in Figure 51.
F
IGURE 51. INSERTING AN SFP TRANSCEIVER INTO AN SFP SLOT
5. Verify that the handle on the transceiver is in the upright position, as
shown in Figure 52. This secures the transceiver and prevents it from
being dislodged from the slot.
F
IGURE 52. POSITIONING THE SFP HANDLE IN THE UPRIGHT POSITION
S
FP
S
FP
SFP Transceiver
Handle