Allied Telesis AT-x230-28GP - Figure 36: Mounting an AT-X230-18 GP, AT-X230-18 GT, or

AT-x230-10GT, AT-x230-10GP, AT-x230-18GT, AT-x230-18GP, AT-x230-28GT and AT-x230-28GP Switch Installation Guide
63
3. Mount the switch in a 19-inch equipment rack using four equipment
rack screws (supplied with the equipment rack) (Figure 36).
F
IGURE 36. MOUNTING AN AT-X230-18GP, AT-X230-18GT, OR
AT-
X230-28GT SWITCH IN AN EQUIPMENT RACK
4. Go to “Cabling the switch” on page 70