C613-50631-01 Rev A Command Reference for IE340 Series 2020
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
(ACCESS-LIST EXTENDED IP FILTER)
Then use the following commands to add a new entry to the named access-list
‘my-acl’ that will reject packets from 10.0.0.1 to 192.168.1.1:
awplus(config-ip-ext-acl)# deny ip host 10.0.0.1 host
192.168.1.1
awplus(config-ip-ext-acl)# 20 permit ip any any
Example 3
[list-number]
Use the following commands to remove the access-list filter entry with sequence
number 20 from extended numbered access-list 101.
awplus# configure terminal
awplus(config)# access-list 101
awplus(config-ip-ext-acl)# no 20
Example 4
[list-name]
Use the following commands to remove the access-list filter entry with sequence
number 20 from extended named access-list my-acl:
awplus# configure terminal
awplus(config)# access-list extended my-acl
awplus(config-ip-ext-acl)# no 20
Related
commands
access-list extended (named)
access-list (extended numbered)
show interface access-group
show ip access-list
show running-config
To Next Page
Loading...
Need help?
General
