C613-50631-01 Rev A Command Reference for IE340 Series 877
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IP ADDRESSING AND PROTOCOL COMMANDS
IP
FORWARDING
ip forwarding
Overview This command enables IP forwarding on your device. When enabled, your device
routes IP packets.
The no variant of this command disables IP forwarding on your device. Even when
IP forwarding is not enabled, the device can still work as an IP host; in particular, it
can be managed by IP-based applications, such as SNMP, Telnet and SSH.
Syntax
ip forwarding
no ip forwarding
Default IP forwarding is enabled by default.
Mode Global Configuration
Examples To enable your device to route IP packets, use the commands:
awplus# configure terminal
awplus(config)# ip forwarding
To stop your device from routing IP packets, use the commands
awplus# configure terminal
awplus(config)# no ip forwarding
Related
commands
show ip forwarding
To Next Page
Loading...
Need help?
General
