62
C613-50631-01 Rev A Command Reference for IE340 Series 3162
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SNMP Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
SNMP. For more information, see:
•the Support for Allied Telesis Enterprise_MIBs in AlliedWare Plus, for
information about which MIB objects are supported.
•the SNMP Feature Overview and Configuration_Guide.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“alias (interface)” on page 3164
•“clear mac address-table notification mac-change” on page 3165
•“debug snmp” on page 3166
•“mac address-table notification mac-change” on page 3167
•“mac address-table notification mac-change history-size” on page 3168
•“mac address-table notification mac-change interval” on page 3169
•“mac address-table notification mac-threshold” on page 3170
•“show counter snmp-server” on page 3172
•“show debugging snmp” on page 3176
•“show mac address-table notification mac-change” on page 3177
•“show running-config snmp” on page 3179
•“show snmp-server” on page 3180
•“show snmp-server community” on page 3181
•“show snmp-server group” on page 3182
•“show snmp-server trap” on page 3183
•“show snmp-server user” on page 3184
To Next Page
Loading...
Need help?
General
