24 x530 Series Quick Installation Guide
already providing its maximum power to other devices. The PoE+
budgets are listed in “PoE+ Power Budgets” on page 5.
Review the powered device’s documentation to confirm that the
device supports Mode A of the IEEE 802.3at standard and that it
uses pins 1, 2, 3, and 6 on the RJ-45 port to receive power.
Check that the device’s power requirements do not exceed 25.5W
by reviewing its documentation or data sheet.
Copyright 2022 Allied Telesis, Inc.
All rights reserved. No part of this publication may be reproduced without prior written
permission from Allied Telesis, Inc.
Allied Telesis, VCStack, and the Allied Telesis logo are trademarks of Allied Telesis,
Incorporated. All other product names, company names, logos or other designations mentioned
herein are trademarks or registered trademarks of their respective owners.
Allied Telesis, Inc. reserves the right to make changes in specifications and other information
contained in this document without prior written notice. The information provided herein is
subject to change without notice. In no event shall Allied Telesis, Inc. be liable for any
incidental, special, indirect, or consequential damages whatsoever, including but not limited to
lost profits, arising out of or related to this manual or the information contained herein, even if
Allied Telesis, Inc. has been advised of, known, or should have known, the possibility of such
damages.
To Previous Page
Loading...
Need help?
General
