Allied Vision Alvium 1800 Series - Bare Board

148Alvium USB Cameras User Guide V3.6.4
Specifications
Bare Board
Dimensions that are common between different models are shown in Figure 44,
model specific dimensions are listed in Table 68. Mechanical length (ML) defines
the mechanical distance from the mounting area to the lens mount front flange,
without optical filter. Components height (CH) relates to the electronic
components with maximum height, in some cases the sensor.
Figure 44: Bare Board dimensions
Mechanical length for S-Mount and CS-Mount
Mechanical length for other mounts is:
• CS-Mount: [C-Mount value] – 5 mm
• S-Mount: depending on your design.
Camera model
ML: Mechanical
length*
for C-Mount
CH: Components
height,
incl. the sensor
B1: Board
thickness
B2: Board
thickness
B3: Board
thickness
Alvium 1800 U-030 VSWIR 19.613 mm 2.87 mm 1.25 mm 2.20 mm 3.75 mm
Alvium 1800 U-040m/c 19.897 mm 2.27 mm 1.20 mm 2.20 mm 3.75 mm
Alvium 1800 U-050m/c 19.604 mm 1.40 mm 1.75 mm 3.00 mm 4.55 mm
Alvium 1800 U-052m/c 19.713 mm 2.87 mm 1.10 mm 2.20 mm 3.77 mm
Alvium 1800 U-120m/c 19.689 mm 1.44 mm 1.25 mm 2.40 mm 3.95 mm
Alvium 1800 U-130 VSWIR 19.613 mm 2.87 mm 1.25 mm 2.20 mm 3.75 mm
Alvium 1800 U-158m/c 19.897 mm 2.27 mm 1.20 mm 2.20 mm 3.75 mm
Alvium 1800 U-240m/c 19.929 mm 2.27 mm 1.25 mm 2.20 mm 3.75 mm
Alvium 1800 U-291m/c 19.713 mm 2.87 mm 1.10 mm 2.20 mm 3.77 mm
Alvium 1800 U-319m/c 19.929 mm 2.27 mm 1.25 mm 2.20 mm 3.75 mm
Alvium 1800 U-500m/c 19.739 mm 1.67 mm 1.30 mm 2.40 mm 3.95 mm
Alvium 1800 U-501m/c NIR 19.739 mm 1.67 mm 1.30 mm 2.40 mm 3.95 mm
*Theoretical values
Table 68: Bare Board model specific dimensions and nominal values (sheet 1 of 2)
26.3
+
-
0.2
0.1
25
±0.1
25
±0.1
26.3
+
-
0.2 0.1
Sensor area
Do not mount here
DŽƵŶƟŶŐĂƌĞĂ
CH
7.7
A
26.4
+
-
0.2
0.1
26.4
+
-
0.2 0.1
22
±0.1
24.5
±0.1
26.3
26.4
B3 ± 10%
B1 ± 10%
B2 ± 10%
25
A (10 : 1)
IPSB
BAR
CODE
^ĞŶƐŽƌĂŶĚĞůĞĐƚƌŽŶŝĐĐŽŵƉŽŶĞŶƚƐĂƌĞƐĐŚĞŵĂƟĐƐĂŶĚǀĂƌLJďĞƚǁĞĞŶŵŽĚĞůƐ
DŽƵŶƟŶŐĂƌĞĂ
ML