Allied Vision Alvium 1800 Series - Linux: Reactivating Operational Mode; Windows: Activating U3 Mode

226Alvium USB Cameras User Guide V3.6.4
Performance and troubleshooting
Linux: Reactivating operational mode
Open Vimba Viewer.
The camera boots up. This may take about 2 seconds.
Windows: Activating U3 mode
1. Connect to the camera and use as you like.
2. Set the
DevicePowerSavingMode to SuspendMode.
3. Close all Vimba Connections, including the first Vimba Viewer dialog.
4. In the Device Manager, click Disable Device for the Allied Vision USB3 Vision
Device:
Figure 92: Disabling the Alvium camera in the Device Manager