28Alvium USB Cameras User Guide V3.6.4
Document history and conventions
V3.2.1 2020-Dec-15 Firmware version: 00.03.00.31919
• Added information on the exposure time offset in
Exposure time behavior regarding ExposureMode
on page 52.
• Updated values for ROI frame rates and for
minimum and maximum exposure time in Alvium
1800 U model specifications on page 56.
• Added values for White balance default on page
144.
• Updated drawings and dimension values for bare
board cameras in Technical drawings on page 147.
• Added information about Serial numbers of
Alvium® chips and bare board cameras on page
184.
• Added description for push-pull in GPIOs
description on page 203.
• Added Trigger features and UserSetDefault on
page 208.
• In Image data flow on page 210, added FPNC
support for all models, except for Alvium 1800
U-2050.
• Added notes about frame rates for rolling shutter
cameras run in triggered mode.
• Applied editorial changes.
V3.2.0 2020-Jul-22 Firmware version: 00.02.00.29974
• Added Alvium 1800 U-240m/c, 1800 U -508m/c,
and 1800 U-1240m/c models.
• Updated ROI frame rates and pixel formats in
Alvium 1800 U model specifications on page 56.
• Added QE and spectral response to Alvium 1800
U-2050m/c on page 136.
• Extended information in Shock and vibration on
page 47.
• Updated spectral response graphic in IR cut filter
on page 164.
• Added Sensor position accuracy on page 165.
• Added Read before use on page 2.
• Corrected minor errors.
Version Date Remarks
Table 2: Document history (sheet 4 of 5)
To Next Page
Loading...
