4
CODESYSTEM
The ALMATEC Maschinenbau GmbH is certified as a modern, quality‐orientated enterprise according to
DINENISO9001:2008and14001:2005.Beforereleasefordispatch,anypumpoftheE‐Serieshastoundergo
anextendedfinalcontrol.Theperformancedataregisteredduringthisarearchivedinourrecordsand
canbe
readbackatanytime.
AsageneralruleinthecountriesoftheEUonlysuch machinesareallowedtotakeintooperation,whichare
determined to meet the regulations of the EU machinery directive, the harmonized standards, European
standards and the respective national standards. Hence the operator
has to verify whether the ALMATEC
pump manufactured and delivered properly according to the customer’s order meets the mentioned
requirements.
Therefore make sure, bef ore putting the pump into operation, that the pump and the used materials of
constructionaresuitablefortheprovidedapplicationandtheinstallationsite.Tocheck
this,theexactpump
code is required. This code, the serial number and the year of constructionare noted on theidentification
platesonthepumpitself.
ExampletoclarifytheALMATECpumpcode:
E 15 T T T ‐ R
Optionalequipment(separatemanualforcodeBS,
separatespare
partslistsforcodesOG,ZandX):
BS Barrierchambersystem
C Strokecounting
D Diaphragmmonitoring
F FlangeconnectionPN10
H Pumpforfoodcontact(EC1935/2004)
L ConductivePTFE/EPDMcompounddiaphragm
OG Pumpwithoutinnerthreads
P DiaphragmmadeofmodifiedPTFE
R Drainingsystem
TV Pumppreparedforpulsationdamper
V FKMhousinggasketswithPTFEdiaphragms
W ANSIproductports
Z Externalcontrolled
X Customizedsolutions
Typeandmaterial E Ballvalves,EPDM
ofproductvalves: N Ballvalves,NBR
T Ballvalves.PTFE
S Ball
valves,stainlesssteel
Z Cylindervalves,PTFE
Diaphragmmaterial: E EPDM
N NBR
T PTFE/EPDM compound
Housingmaterial:E PE
F PEconductive
T PTFE
U PTFEconductive
Size,portdimension
ALMATECair‐operateddiaphragmpump,E‐Series
Thenumberinbrackets,whichis
added toeverypartmentioned inthe followingexplanations, referstoits
positioninthesparepartlistandtheexplodedview.
To Next Page
Loading...
